easysteer speed sensitive controller can convert your vehicles existing speed pulses into a signal that the steering ECU expects to see. this gives the steering ECU the ability to run different assistant levels depending on the vehicle speed, as it was designed to , and all the changes in steering assistance are done seemlessly
<15MPH - High Power Assistance
15-35MPH - Medium Power Assistance
>35MPH - Low Power Assistance or Assistance off
you set the speeds to suit your car and driving needs
to do this the Speed Unit needs a 5 to 12V pulse from your speed sensor, so it would need either a proximity sensor, or a hall sensor that detects a bolt, toothed wheel, etc. if you have a VR sensor (abs style) then this needs converting to a 12V pulse before it can feed the steering controller unit.
based on our own insatls, our speed contollers are easier to instal with our very reliable LED proximity switches, these are very hard wearing and product a reliable signal needed by the control unit, they also have an LED to show you when its reading correctly
our units are professionally made circuits on a custom PCB they are RoHS compliant (Restriction of Hazardous Substances) an EU directive intended to protect the enviroment by forcing manufacturers to remove environmentally hazardous substances.